CUSTOM Sublimation Transfer sheets - Ready to Press- NO Minimum!Regular price $2.50 Save $-2.50
CUSTOM Sublimation Transfers - Ready to press … NO MINIMUMS!
Please Note: THIS IS A CUSTOM SUBLIMATION TRANSFER ONLY, NOT A SHIRT, NOT A VINYL TRANSFER AND NOT A DIGITAL DOWNLOAD.
How it works:
Purchase, select the paper size and quantity and checkout.
Upload your PNG (300dpi) OR SVG graphic. I do allow for “Gang sheets” which is the process of having multiple images on a single sheet of paper. To do this, please send your images over already grouped together in the correct size artboard. I can also help you with sizing and grouping for a fee.
I also offer TEST SWATCHES which are 2.5” designs (8 designs per 8.5x11 sheet) … these are meant to test your Settings, vapor pillow placement etc prior to pressing your garment. Press it onto a scrap substrate. It comes with multiple 2” designs.
A few things to NOTE about sublimation and sublimation transfers:
- Sublimation transfers require a HEAT PRESS to be applied. They can not be applied with an iron.
- Transfers must be used on a substrate coated for sublimation (mugs,etc.) or fabric with at least 50% polyester. 100% polyester is recommended for best results. The fabric must be white or a light color such as an ash gray. The image will not show up on black or dark colors. Any other colors other than white may alter the colors when pressed.
- Also, sublimation does not use white ink therefore if there is white in the design it will become the color of the fabric you apply it to (ie if there is white in the design and you press it to an ash gray shirt, that part would be ash gray)
- The colors on the listing may differ from the colors on transfer. The true colors will show once pressed to the substrate.
- Garment transfers will have the image reversed, this is because you will be pressing the image face down on your substrate, which will press the image the correct way (right to left)
**There are no returns or refunds on any transfers. If you need to have an item before a certain date then please message me and you can pay for guaranteed shipping. I have no control over USPS or the weather so if you do not receive an item when you need it, there will be no returns.
**Due to the rapid turnaround time for these transfers I can only offer cancellation within 12 hours of purchase. However, no returns or cancellations will be accepted once the item has been shipped. If you have any questions, please feel free to contact me. I try to return all messages within 2-3 business days.
HELPFUL SIZING GUIDE:
TEST SWATCHES- 2.5” (8 designs per 8.5x11 sheet) … these are meant to test your Settings, vapor pillow placement etc prior to pressing your garment. Press it onto a scrap substrate. It comes with multiple 2” designs.
Baby - 4” on the longest side
Youth - 8” on the longest side
Adult - 11” wide (12" max length)
XL-XXL and Full Back Images - 12” wide (15" max length)
** For T-shirts- Press at 385-400 degrees for 45-60 seconds with medium pressure. Every heat press is different so I recommend getting the “Test” sheet which gives you multiple “test” designs so you can play with different heat settings and record what works best for YOU. For apparel use a 50% or higher poly count and a light colored shirt for best results. **
**You will want to place a piece of butcher paper or copy paper inside the shirt, under the shirt and on top of the shirt (I buy mine at Sam's... HUGE roll for $20!)… in addition to your Teflon sheet on top before pressing. This prevents dyes from bleeding through to the back of the shirt or getting on your heat press.
** do NOT move the transfer after it has been heat pressed, take it off the shirt in one swoop, dont let it move or you will get something called “Ghosting”
** Some people like to use heat transfer tape, others use re-positionable sticky spray… do you research! I personally use transfer tape until it's on the heat press, then I carefully take the tape off so that after its pressed I can remove it easily without any tugging (Avoiding ghosting). If you use the adhesive spray, make sure you are using one meant for sublimation and remember to spray LIGHT. Any blotches from the spray can WILL show up when pressed so again, I urge you to do your research
*** RIP THE EDGES OF THE PAPER PRIOR TO PRESSING… Rip it by hand, don’t cut… it makes the edges smoother and will not leave lines in the fabric from the hard edge of the paper.
*******GRAPHIC FILE REQUIREMENTS*******
***SUPER IMPORTANT***Your transfers will only turn out as good as the files you use. If you send a low quality, internet-size pictures / files (72dpi or less) you will receive less than ideal transfers. If you are unsure of your file quality, please send me a note PRIOR TO ORDERING.
-Ideal file type(s): PDF, JPG, PNG, SVG
-Color Format: RGB
-File Size / Resolution: 300 d.p.i
-Do not mirror / reverse your images. (I will do that for you.)
*If you are sublimating substrates that do not require mirroring such as cutting boards etc, please let me know prior to checkout.
As stated above, our turnaround is just 3-5 business days! I however have no control over USPS or the weather so if you do not receive an item when you need it, there will be no returns. If you need it to arrive at a certain time, guaranteed, I would recommend selected the expedited shipping option.
Don't hesitate to reach out with any questions… before or after your purchase. I am here to help :)
Follow us on social media @SunshineandPixels